Reasons for Paint Peeling in Scappoose, OR
Reasons for Paint Peeling in Scappoose, OR
The whole process of painting your walls, ceilings, or even furniture can be a time-consuming but rewarding thing to do.
However, unexpected things such as paint peeling may happen.
Paint peeling can be a very exasperating thing for both homeowners and painting contractors alike.
It's a very common problem many painters encounter and it can sometimes be the reason why many homeowners request a repainting job.
Even recently applied paint can be susceptible to this, which ruins the effort put into painting in the first place.
It's always in your (and your home's) best interests to read up on why this happens so you can avoid it in future painting projects.
To find out why paint peeling happens, here are Reasons for Paint Peeling in Scappoose, OR:
Moisture or Water Damage
Damp or wet surfaces are notorious for causing your paint to peel.
When water gets under paint, it doesn't allow the paint to adhere well to the surface, making it peel shortly after application.
In areas with poor ventilation, take note of humidity and condensation, as these might be your biggest foes as well.
This problem usually happens in areas of the home that normally come into contact with water.
Examples of these are bathrooms, kitchens, and laundry rooms.
Be sure to take care of any leaks, excess humidity, or excess condensation before painting to avoid this tricky problem.
Not Using High-Quality Paint
Painting can be quite costly depending on which room or what type of furniture you intend to paint.
Sometimes, people may choose to save a couple of bucks in exchange for cheaper paint.
Cheaper paint may be poorer in quality, and not work or apply as well as higher-quality ones.
It can be tempting to purchase lower-costing paint, but that's the one thing you shouldn't cheap out on.
Low-quality paint can also be one of the biggest reasons for peeling paint since it could lack good adhesion properties.
When choosing the paint to buy, be sure to purchase one that has good adhesion and color payoff.
Going Overboard with Paint Layers
Having too much of something doesn't always mean it's a good thing.
You have to be mindful of every layer of paint you coat onto your surfaces.
Coats of paint that may be too thick can pack on weight and start being too heavy and in turn, don't let it stick to the surface well.
Similarly, surfaces that have been previously painted - and are still being repainted over and over again - can start to peel over time because of the buildup of layers and weight.
Ceilings are the most common victims of this problem as gravity tends to naturally let chipping and peeling occur quicker.
Be careful to spread the paint evenly between coats to avoid over-layering.
The Surface Isn't Paint-Ready
One of the best ways to make sure your painting job goes well from start to finish is to prep for it.
Being negligent or forgetting to do so might result in an overall bad paint job.
Before you even begin to apply the paint to your intended surface, make a quick inspection first.
A clean surface is always the best type of surface to work with.
Dust, grease, grime, oil, or other types of dirt that are present on your walls can cause uneven and bubbling paint.
Painting over a dirty surface is a surefire way of getting your paint peeled in the near future.
Before starting the painting process, always remember to do thorough and proper prep work.
Clean the walls and prime them before painting to make applying the paint easier with better results later.
If we can help in any way with your painting in Scappoose, OR and beyond, feel free to contact us at CHSPainting, we are always ready to help! Please contact us at CHS Painting. Office. 503-543-4875 Web. www.chspainting.com e-mail.mike@chspainting.com
Comments